120MM OF-843B Mortar
3D Prints > Mortar > 120MM OF-843B Mortar
The 120MM OF-843B Mortar is a 0 hour print.
- Connect
midsection.stltoridges.stl - Connect
nosecone.stltoridges.stl - Connect
fuze_adapter.stltonosecone.stl - Glue
fuze_insert.stlinto the large hole on the side offuze.stl - Connect
fuze.stltofuze_adapter.stl - Connect 5x
fin.stltotailfin.stlusing light force, press the fin into the slot. Use a light layer of glue to attach permanently. - Connect
tailfin.stltomidsection.stl
Known issues
- An M-12 fuze with the safety cap removed is not currently included in this model
Copy object namekey for print order: